Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MEA261C Mapping and Delivery Guide
Use electronic test equipment

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency MEA261C - Use electronic test equipment
Description This unit of competency is part of Avionic Certificate IV training pathways. It covers the competencies required to correctly use electronic test equipment. The unit is used in workplaces that operate under the airworthiness regulatory systems of the ADF and CASA.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application This unit requires application of skills in the use of electronic test equipment to measure electronic circuit parameters and test performance.Applications include aircraft components both in the hangar and workshop.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites MEA101B Interpret occupational health and safety practices in aviation maintenanceMEA103B Plan and organise aviation maintenance work activityMEA105C Apply quality standards applicable to aviation maintenance processesMEA107B Interpret and use aviation maintenance industry manuals and specificationsMEA108B Complete aviation maintenance industry documentationMEA109B Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance Not applicable
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Select required test equipment
  • System/component test requirements are identified
  • Appropriate test equipment is selected
       
Element: Prepare test equipment for use
  • Test equipment is checked for serviceability and applicable leads are fitted, where required
  • Applicable function and range of measurement is selected, as required
       
Element: Test system or component
  • Test points and polarity are determined
  • Required parameters are measured with the test equipment
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to use electronic test equipment to measure electronic circuit parameters while observing all relevant safety precautions.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The underlying skills inherent in this unit should be transferable into all areas that require the use of electronic test equipment as listed in the Range Statement. It is essential that the general aspects of electronic test equipment selection, preparation for use and safe application to a representative range of measurement and testing tasks are clearly understood.

Evidence of knowledge about the selection and use of the range of test equipment listed in the Range Statement, and of the methods used to identify applicable polarity and connection to components and circuits for required measurement or testing.

A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of the unit of competency are being achieved under routine supervision, with each item of test equipment in Groups 1 to 6 in the Range Statement having been used to measure electronic circuit parameters and test performance (Group 2 may be omitted if not applicable to enterprise). This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry Evidence Guide.

Context of and specific resources for assessment

Competency should be assessed in the work environment, or simulated work environment, using electronic test equipment specified in maintenance documentation. It is also expected that applicable test equipment can be selected on the basis of general trade knowledge where specific test equipment is not specified.

Method of assessment

Guidance information for assessment

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

Look for evidence that confirms skills in:

applying relevant OHS practices

methods of connection of test equipment to components or circuits

methods used to determine polarity and applicable connection points for measurement or testing

Required knowledge

Look for evidence that confirms knowledge of:

the construction, calibration for use and testing for seviceability of:

electronic multimeters

phase-angle voltmeters

oscilloscopes (dual differential, differential, delayed time base and storage)

current probes

logic and discrete component testers

electronic component substitution boxes and miscellaneous test adapters

use of selectors and scale adjustment of each item of test equipment to ensure accurate measurement of applicable parameters

high speed oscilloscope techniques, probe calibration and CRO safety precautions

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Note

Range statements listed below are numbered to facilitate specification of the assessment requirements included in the Evidence Guide

Electronic test equipment

Test equipment includes:

1. Electronic multimeters

2. Phase-angle voltmeters (where applicable to enterprise)

3. Oscilloscopes (dual differential, differential, delayed time base, storage)

4. Current probes

5. Logic and discrete component testers

6. Electronic component substitution boxes and miscellaneous test adapters

Application of this unit may relate to:

scheduled or unscheduled maintenance activities

individual or team-related activities

Procedures and requirements

Refer to industry standard procedures specified by manufacturers, regulatory authorities or the enterprise

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
System/component test requirements are identified 
Appropriate test equipment is selected 
Test equipment is checked for serviceability and applicable leads are fitted, where required 
Applicable function and range of measurement is selected, as required 
Test points and polarity are determined 
Required parameters are measured with the test equipment 

Forms

Assessment Cover Sheet

MEA261C - Use electronic test equipment
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MEA261C - Use electronic test equipment

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: